Shade structures by Shade Systems Inc. makes the coolest solutions under the sun. Shade Systems is the ideal place to shop for your canopy, tent or shelter. We manufacture and supply canopies, tents and shelters offering solutions to shade you, your family or business from the harsh rays of the sun. Shade Systems manufactures durable and attractive pre-engineered outdoor shade structures designed to protect children and adults as well as property from exposure to the sun's dangerous U.V. rays.
Manufacturing plant located in sunny Ocala, Florida, and serving the counties of Broward, Dade, and Palm Beach as well as customers worldwide.
Specifications - Sail Products
GENERAL: Shade Systems™ ‘Sail’ products are designed and manufactured to the most exacting specifications by skilled craftsmen, and certified by Professional Engineers for structural soundness of designs. All Shade Systems are shipped knocked-down, with complete assembly instructions, and ready for easy in-field installation.
MATERIAL: All materials shall be structurally sound and appropriate for safe use. Product durability shall be ensured by the use of corrosion-resistant metals such as stainless steel, and coatings such as zinc-plating, galvanizing, and powder-coating on steel parts, subject to the Project-Specific requirements below. Fabrics used shall include UV-stabilizers and fire retardants for longevity and safety.
WELDMENTS: All tubing members are factory-welded by Certified Welders to American Welding Society (AWS) specifications and to the highest standards of quality workmanship. Weldments are finished with a zinc-rich galvanized coating. No field welding is required in the assembly of Shade Systems products.
POSTS, STRUCTURAL FRAME TUBING, AND HARDWARE: All tubing used shall be cold-formed and milled per ASTM A-135 and ASTM A-500. Material testing is in accordance with ASTM E-8. Minimum yield is 40,000 psi with a minimum tensile strength of 45,000 psi on all posts. Support pipes shall be schedule 40 black steel with appropriate pre-treatment for powder-coating. All fastening hardware shall be stainless steel.
POLYESTER POWDER-COATING PROCESS: Where applicable, all powder-coated parts are completely cleaned and a hot zinc phosphate pretreatment with non-chromic sealer is applied. Powder-coating is then electrostatically applied and oven-cured at 375 to 425 degrees Fahrenheit. Polyester powders shall meet or exceed ASTM standards for Adhesion, Hardness, Impact, Flexibility, Overbake Resistance, and Salt Spray Resistance. Colors shall be specified.
STANDARD FOOTINGS: Footings shall be designed per stringent Florida building codes for the specific structure. Columns will be provided as standard direct embedment. Other footing methods are available upon request.
ROOFING: Sails are designed by Shade Systems only for use with CoolNet™ polyethylene shade fabric. Fabric is attached to posts using the Fastening Systems below in conjunction with vinyl covered minimum ¼” diameter galvanized cables. Cable fasteners are zinc-plated copper for maximum corrosion resistance.
ENGINEERING DATA: Structures are engineered to meet or exceed the requirements of the 2002 International Building Code (IBC), and the following standard specifications:
| Wind Speed(Frame only): | 150 m.p.h. |
| Wind Speed (Frame w/canopy): | 90 m.p.h. |
| Live Load: | None |
| Snow Load: | None |
Optional designs with greater wind speeds, live loads, and snow loads are available.
FASTENING SYSTEM: CoolNet™ Shade Fabric shall be delivered complete with fastening system installed. Fastening System to consist of factory-formed stainless steel tensioning plates pre-attached to fabric canopies at each corner, and cables per the above hemmed into the fabric at the factory and terminating in the bracket. Posts shall be equipped with an adjustable 360-degree swivel and pivot attachment mechanism to which the tensioning plate fastens. Tensioning plate includes a stainless steel adjustment bolt which, when turned, tensions the fabric for a taut fit. Fabrics, cables, and brackets which are not pre-assembled at the factory are not acceptable. Cables which attach to posts with u-bolts or ‘S’ hooks, and which do not use a stainless steel bracketing system similar to the above are not acceptable.
CoolNet™ SHADE FABRIC: Knitted of monofilament and tape construction high density polyethylene with Ultra Violet (U.V.) stabilizers and flame retardant. UV-Block Factor varies by standard color offered from 91% to 99%.
| Nominal Thickness: | 0.057 inches |
| Fabric Mass: | Min. 337 g/m2 |
| Light Fastness: | 7-8 (Blue Wool Scale) |
| Weather Fastness: | 4-5 (Grey Scale Test) |
| Tear Resistance: | Warp 210N |
| Weft 276N | |
| Breaking Force: | Warp 786N |
| Weft 1544N | |
| Bursting Pressure: | Mean 3125kPa |
| Bursting Force: | Mean 1775N |
All hems and seams are double row lock stitched using exterior grade UV-stabilized polyethylene GORE™ TENARA® sewing thread (GORE and TENARA are trademarks of W. L. Gore & Associates).
FLAMMABILITY: CoolNet™ Shade Fabric is treated with fire retardants, and passes the requirements established under the NFPA 701 Test Method 2 test standards for flammability, including the accelerated water leaching protocol. Written evidence of compliance with this standard, including the accelerated water leaching protocol, must be furnished with bid proposal.
|
COLOR |
WEIGHT (g/m2) |
SHADE FACTOR % |
UVR BLOCK % |
|
Navy Blue |
316 |
96 |
99 |
|
Forest Green |
340 |
96 |
97 |
|
Aquatic Blue |
348 |
88 |
94 |
|
Desert Sand |
322 |
84 |
95 |
|
Rivergum Green |
318 |
86 |
93 |
| Eggshell White | 342 | 79 | 95 |
| Canary Yellow | 342 | 77 | 93 |
|
Bright Red |
342 | 81 | 91 |
| Light Blue | 348 | 95 | 97 |
| Silver Grey | 318 | 92 | 97 |
PLEASE NOTE: Because of our commitment to continuous product development and improvement, Shade Systems reserves the right to change specifications at any time without notice.
Contact Shade Systems at 1-800-609-6066 to learn more about our shade solutions.